During the reboot operation, the following error message appears: Acronis Disk Director 11 Home Update 2 Version Code: 58A1AEB Press to reboot ADD11 wont successfully resize the partition after reboot. Posts: 3. Comments: 1. Forum Moderator. Spanned volume A volume that consists of disk space from two or more dynamic disks p.

A spanned volume can reside on up to 32 disks. Unlike mirrored p. Unlike striped volumes p. Access to data on striped volumes is usually faster than on other types of dynamic volumes, because it can be performed simultaneously on multiple hard disks. Unlike a mirrored volume p.

A striped volume is also known as a RAID-0 volume. Mirrored volume A fault-tolerant volume whose data is duplicated on two physical disks p. Each of the two parts of a mirrored volume is called a mirror. All of the data on one disk is copied to another disk to provide data redundancy. If one of the hard disks fails, the data can still be accessed from the remaining hard disks. Volumes that can be mirrored include the system volume p. A mirrored volume is sometimes called a RAID-1 volume. Note: No redundancy provided by the dynamic volumes architecture can replace the proper backup procedure.

If you want to be sure of the safety of your data, the best policy is to combine both precautions. Each such volume is called active, system, or boot, depending on its function. If only one Windows operating system is installed on your machine, a single volume is often the active, system, and boot volume at the same time.

Because of their special role, you should use extra caution when performing operations with these volumes. Some operations with these volumes have limitations as compared to ordinary volumes. Active volume This is the volume from which the machine starts after you switch it on. The active volume usually contains one of the following programs: The operating system A program that enables you to choose which operating system to run if more than one is installed , such as GRUB A diagnostic or recovery tool that runs before the operating system, such as Acronis Startup Recovery Manager In Acronis Disk Director, the active volume is marked with a flag-like icon: If you choose to run a Windows operating system, the start process continues from the volume known as the system volume.

The system volume contains files that are necessary to start Windows, such as boot. There is always one system volume, whereas each of the installed Windows operating systems usually stores its files on its own volume, called a boot volume.

Boot volume This is the volume on which the files of a particular Windows operating system are stored. A boot volume contains folders such as the Program Files folder and the Windows folder. Note: The notions of system volume and boot volume apply only to Windows operating systems. The latest operating systems, including Windows 7 and Windows Vista, already support the new sector size.

For Windows XP, however, you need to take extra steps to ensure normal access to the volumes on such disks. When creating volumes on a disk with a 4-KB sector size that you are planning to access from Windows XP, follow these guidelines: If Windows 7 or Windows Vista is installed in addition to Windows XP, select the disk layout of either of those operating systems see Disk layout p.

Otherwise, create the volumes by running Acronis Disk Director from a bootable media see Working under bootable media p. After the volumes are created, you can perform other operations with them including changing their size under any disk layout. In this section Precautions User privileges Running Acronis Disk Director Acronis Disk Director main window Disk and volume information Disk layout Performing operations Log Collecting system information How to Precautions To avoid any possible disk and volume structure damage or data loss, please take all necessary precautions and follow these simple rules: 1.

Back up the disk whose volumes will be created or managed. Having your most important data backed up to another hard disk or CD will allow you to work on disk volumes being reassured that your data is safe. Acronis is an extremely effective comprehensive data backup and recovery solution Acronis True Image.

It creates a data or disk backup copy stored in a compressed archive file that can be restored in case of an accident. Check volumes p. This means no other disk management utilities such as the Windows Disk Management utility can access it at that time.

With these simple precautions, you will protect yourself against accidental data loss. In order to perform any operation using Acronis Disk Director, you must be logged on as a member of the Administrators group. In the disk management area, examine the current layout of disks and volumes.

Add one or more management operations on disks and volumes to the queue of pending operations. These operations will take effect only after you commit them. In the disk management area, examine how the layout of disks and volumes will look when the pending operations are completed. Commit the pending operations.

Some operations, such as changing the size of a volume from which Windows starts, may require restarting the machine. Running Acronis Disk Director from a bootable media Acronis Disk Director has a bootable version that can be run on a bare metal system, or on a crashed machine that cannot boot normally, or even on a non-windows system, like Linux. While working under bootable media p.

Menu The menu provides access to all the actions, tools and settings of Acronis Disk Director. Toolbar The toolbar displays the current disk layout p. Disk Management area The disk management area consists of two views. Table view The table view lists all the disks and their volumes and lets you select any of them to perform operations.

You can sort volumes by columns. Click the column’s header to sort the volumes in ascending order. Click it once again to sort the volumes in descending order. If required, you can hide the shown columns and show the hidden ones.

To show or hide columns 1. Right-click any column header to open the context menu. The menu items that are ticked off correspond to the column headers presented in the table. Graphical view The graphical view provides visual information about all the disks and their volumes for better understanding of the volume configuration.

The graphical view also lets you select both the volumes and disks to perform operations on them. Actions and tools pane Provides quick access to the operations that can be performed on the selected disk or volume see Volume operations p.

The status helps you to estimate the condition of a disk or volume Disk statuses Check the disk status to estimate whether the disk is functioning without problems. Disk statuses are displayed in the graphical view below their capacity. Here are brief descriptions of the most common disk statuses: Online A basic or dynamic disk is accessible and functioning correctly. This is the normal disk status. You can change an online disk to offline see Changing a disk status: online to offline p.

Online Errors Copyright Acronis, Inc. If a disk has errors, we recommended you to repair it as soon as possible to avoid data loss. Offline A dynamic disk is accessible in read only mode if you switched it to offline previously , or not accessible at all corrupted or intermittently unavailable. You can make the disk that you previously switched to offline, fully accessible see Changing a disk status: offline to online p.

My dealer tells me that, due to the sales doc, GPT is fully supported!! The restoration went fine, and the new disk was placed in a separate partition of a 2TB drive.

Due to the size of the restored drive I had to reduce the drive partition down in order to get it to my new SSD drive. All went fine until I went to Acronis DD I upgraded to that one today and selected move partition [to the new drive].

There DD reported back that the operation failed after quite a wait and identified the need to run a check-disk on the drive. I set the attribute back to “readonly” booted back into Acronis DD and now it shows that the drive is unsupported. Had the new drive been big enough to take the whole image, it would have been no problem, but it is a GB drive.

Anyway, I’m between a rock and a hard place and have lost a couple of days and nights trying to get back to square one. BTW, the reason for the drive being “unsupported” is totally unclear.

Both the restored drive and the target drive are set to GPT and are basic not dynamic , both show as local disk, NTFS file system, and are partitioned. So when the corrupt data information was flagged and the operation failed, I took the opportunity to change the partition down from to I used Acronis to change the partition size, which it did without a problem. Suggestions are welcome.

What I had intended to do was to recover that C drive backup and use it as the baseline for Win 10 installation, so the answer is OS, not just a data drive – thankfully no data has been lost in this fiasco, but the upgrade has been a nightmare.

First of all I recommend you checking if the disk itself reports to be in good state, even if it is a new one. You can use a free CrystalDiskInfo tool for that: blue color would mean that the disk reports to be healthy, yellow and red would indicate problems at hardware level. Assuming the reported status will be “good”, I suggest you to migrate your system by using backup-restore method with Acronis True Image A trial version would suffice. Users with already installed product: if you don’t know which build you have currently installed, check the build number of your product as described here.

To see the newest build number, please go to Product Updates page. Click Go to downloads: If applicable, select the operating system you want to install the software in. Windows is selected by default: Click Download :.

Click Get product : Further steps depend on deployment type: Cloud deployment: click Open Cloud console , then click on the “account” icon in the top right corner and select Downloads from the drop-down menu. On-premises: click Download to open downloads page: On downloads page, select the necessary individual components for download or download the web installer:.

ADD11 wont resize drive after reboot | Acronis Forum

Acronis Disk Director This release was created for you, eager to use Acronis Disk Director Our intentions are not to harm Acronis software company but to give the possibility to those who can not pay for any piece of software out there. This should be your intention too, as a user, to fully evaluate Acronis Disk Director If you are keeping the software and want to use it longer than its trial time, we strongly encourage you purchasing the license key from Acronis official website.

Our releases are to prove that we can! Nothing can stop us, we keep fighting for freedom despite all the difficulties we face each day. Last but not less important is your own contribution to our cause. You should consider to submit your own serial numbers or share other files with the community just as someone else helped you with Acronis Disk Director Sharing is caring and that is the only way to keep our scene, our community alive.

Please verify you’re human:. The serial number for Acronis is available This release was created for you, eager to use Acronis Disk Director